The GroLine Waterproof Hydroponic pH/Temp Tester is an affordable way to measure the pH of hydroponic nutrient solutions. The maintaining of an optimal pH is essential to maximize optimum growth.
The GroLine Waterproof Hydroponic pH/Temp Tester is Hanna Instruments' latest pocket meter for measuring the pH of a hydroponic nutrient solution. This modern looking meter is only 0.7" thick and extremely ergonomic, fitting comfortably in your hand. The HI98118 has a very large easy to read LCD display that shows both pH and temperature along with calibration, stability, and low battery indicators. All operations are simplified to two buttons. One is for turning the meter on/off and the other for automatic one or two point calibration. This is an advanced meter while maintaining simplicity. There is a third button in the battery compartment that allows the user to customize the meter to their preference. Customization includes temperature readout in oC or oF, automatic shut off selectable from 8 minutes, 60 minutes, or disabled, and lastly the choice of using Hanna's Quick Cal pH/EC standard or traditional buffers values of pH 4.01, 7.01 and 10.01.
The maintaining of an optimal pH is essential to maximize optimum growth. The general rule of thumb is that as pH increases the solubility of minerals and nutrients decrease. It is important that nutrients are soluble for plants to uptake and use for growth. The pH of the nutrient solution can also affect the bacteria that fix nitrogen for the plant to use. Every plant has optimum pH levels for growth. Below is a table for the ideal pH range for a variety of plants. The HI98118 can be used to measure the pH in soils as well as nutrient solutions. The North Carolina State University has outlined a procedure known as Pour Through Sampling Method. This method is used for container plants in which 50 ml of leachate is collected from a thoroughly watered plant and then tested. To measure the pH of soil as a slurry the USDA recommends a mixture of 1 part soil to 1 part water. The slurry is allowed to rest for 10 minutes so that the solids will settle out and the pH of liquid above can be measured.
GroLine Waterproof Hydroponic pH/Temp Tester Features
- Built in temperature sensor for Automatic Temperature Compensated measurements.
- Cloth junction providing a larger surface area than a standard ceramic junction.
- Stability indicator that disappears once a stable reading is obtained.
- Automatic calibration to one or two points at a push of a button.
- Uses Hanna's Quick Cal pH/EC standard with a pH value of 6.86. The standard can also be used to calibrate conductivity meters to 5,000 ?_S/cm.
- Battery % level remaining displayed at start up.
- Low battery indicator that is displayed when less than 10% battery life is remaining.
Follow This Simple Feed Chart Designed by our Research Team
|pH Range||0.00 to 14.00 pH|
|pH Resolution||0.01 pH|
|pH Accuracy (@25?°C/77?°F)||??0.2 pH|
|pH Calibration||automatic, one or two-points (pH 4.01, 7.01, 10.01); one-point calibration using HI5036 or HI50036P Quick Cal calibration solution|
|pH Temperature Compensation||automatic, 0 to 50?°C (32 to 122?°F)|
|Temperature Range||0.0 to 50.0?°C/32.0 to 122.0?°F|
|Automatic Shut-Off||8 minutes, 60 minutes, or can be disabled|
|Battery Type / Life||CR2032 Li-ion / approximately 1000 hours of continuous use|
|Environment||0 to 50?°C (32 to 122?°F); RH 100% max|
|Dimensions||160 x 40 x 17 mm (6.3 x 1.6 x 0.7??™??™)|
|Weight||75 g (2.6 oz.)|