Can Fan Can-Lite 8" x 40", 1000 CFM

Can Fan has designed and built the Can-Lite for convenience and long life.

100% Australian Granulated carbon, aluminum top and bottom, integrated flange and 51% open perforation are features of the Can-Lite™ filter. The Can-Lite™ is available in 9 sizes with a CFM range of 250 – 3000. Can-Lite is manufactured in a dedicated carbon filter plant in North America. Each filter is shrink wrapped, boxed and labeled for ease of use.

Activated carbon filters are the best way to eliminate most VOCs, gasses, and odors from the air. Combined with a fan in a ventilation system, 99.9% of noxious odors can be trapped inside the filter for good.

Through adsorption, activated carbon literally traps the carbon-based contaminants in the air that could harm you and keep them locked tight inside the filter. Using activated carbon ensures optimal pore structure and that the pathways the air travels through the filter are optimal, so that the maximum amount of contaminant becomes trapped in the filter and does not escape into the air.

Determining your requirement - Exhaust vs Recirculating (Scrubbing)

You will need to determine whether or not you are exhausting (going from a contaminated environment to a sterile environment in only a single pass through the filter) or recirculating, aka “scrubbing” (exhausting the system back into the contaminated space).

Exhaust

In an exhaust setting the air only passes through the filter one time so it is imperative that we remove as close to 100% of the contaminate as possible with that one chance. This requires that the contaminant have a certain time in contact with the carbon in order to be fully adsorbed. Our filters are marked with both exhaust and recirculating ratings for just this reason. If you are using this system to exhaust, DO NOT exceed the exhaust rating for the filter, the more this rating is exceeded the less contaminant will be adsorbed because the two will not have enough contact timefor adsorption to fully take place.

Recirculating

In a recirculating system , the contact time is not such a crucial number as we are taking contaminated air, filtering it, and releasing it back into what is typically and constantly decontaminated environment. It is for this reason that it is not necessary to remove 100% of the contaminant in a single pass. Instead we double the exhaust rating which will reduce the contact time, the goal here is to still remove a large portion of the contaminant but to get raise the cycle rate of air through the filter above the rate of emission from the source. Now, instead of removing 99.9% of the contaminant in a single pass we are getting closer to 60% but we are getting twice as many cycles through the filter in the same amount of time and over time, reducing the overall build-up of contaminant in the environment.

Sizing Your Space

Once you’ve determined the type of system you need, it’s time to size your space.

Typically for exhaust we recommend a simple length x width x height /3 calculation. This will give you the amount of air (cubic feet per minute, CFM) that you will need to move to properly ventilate your space allowing for a three-minute air exchange (all the air in the space is exchanged for fresh air every three minutes). This is the number you will match your filter to.

Example:
Room size: 10’x12’x8’ (960 cubic feet)
960 cubic feet / 3 minutes = 320CFM (Minimum recommended CFM to exchange the air every 3 minutes)

For recirculating systems, you can use the same length x width x height but divide by 1.5. This will give you a high cycle rate while still ensuring the removal of a majority of contaminant with each pass through the filter.

Why Can-Filters?

Can-Filters uses the highest grade carbon carrying the highest CTC (First, why carbon filters? Activated carbon filters have been proven an effective tool for air filtration, removing a variety of VOCs (volatile organic compounds), odors, and other gaseous contaminants. They work by a process known as adsorption where VOCs, odors, and other gaseous contaminants adhere to the carbon’s surface. Can Fan also manufactures the LARGEST and smallest filter sizes allowing for the widest range of versatility in your system design right here in North America.

Can-Lite 4" x 15" 250 CFM

Recommended Max CFM:	250 CFM
Prefilter:	Yes
Flange:	Built-in 4″
Outside Diameter:	10 cm / 4″
Height:	38.1 cm / 15″
Total Weight:	4.08 kg / 9 lbs
Carbon Weight:	2.6 kg / 5.7 lbs
Carbon Bed Depth:	2″
Max Operating Temp:	80ºC

Recommended Fans

• S400 - Exhaust
• Can-Fan 4" HO - Recirculating

Can-Lite 6" x 24" 600 CFM

Recommended Max CFM:	600 CFM
Prefilter:	Yes
Flange:	Built-in 6″
Outside Diameter:	25.4 cm / 10″
Height:	66 cm / 24″
Total Weight:	9.07 kg / 20 lbs.
Carbon Weight:	6.44 kg / 14.2 lbs.
Carbon Bed Depth:	2″
Max Operating Temp:	80ºC

Recommended Fans

• S600 - Exhaust
• Max-Fan 6" (speed 2,3) - Exhaust
• Q-Max 6" (speed 1) - Recirculating

Can-Lite Mini 6" x 16" 420 CFM

Recommended Max CFM:	420 CFM
Prefilter:	Yes
Flange:	Built-in 6″
Outside Diameter:	26 cm / 10.25″
Height:	46 cm / 18.125″
Total Weight:	5.9 kg / 13 lbs. (with Box)
Carbon Weight:	4.3 kg /9.5 lbs.
Carbon Bed Depth:	2″
Max Operating Temp:	80ºC

Recommended Fans

• S600 - Exhaust
• Max-Fan 6" (speed 1) - Exhaust
• Max-Fan 6″ (speed 2, 3) - Recirculating
• Q-Max 6" (speed 1) - Recirculating
• Pro-Series 6″ (speed 1, 2, 3) - Recirculating
• Can-Fan 6″ HO - Recirculating

Can-Lite Mini 8" x 25" 600 CFM

Recommended Max CFM:	600 CFM
Prefilter:	Yes
Flange:	Built-in 8″
Outside Diameter:	31 cm / 12.25″
Height:	69 cm / 27.25″
Total Weight:	14.5 kg / 32 lbs. (with Box)
Carbon Weight:	9.3 kg / 20.5 lbs.
Carbon Bed Depth:	2″
Max Operating Temp:	80ºC

Recommended Fans

• S800 - Exhaust
• Max-Fan 8" - Recirculating
• Max-Fan 8" HO (speed 1,2) - Recirculating
• Q-Max 8" (speed 1,2,3) - Recirculating
• Pro-Series 8" (speed 1, 2, 3) - Recirculating
• Can-Fan 8" HO - Recirculating